山特C10KS-C3KS单进单出UPS电源
山特C10KS-C3KS 单进单出UPS电源
Q2:ups电源在线式和后备式的区别
1、后备式UPS电源的工作原理。
2、①市电高负荷时则市电经稳压后直接输出负载，经整流器并令交流电转化为对直流电替电池充电，之时变流器不会工作。
3、②总是市电故障时，交由UPS连续不断电源电池提供电力，经交流电输出负载。
4、后备式UPS电源功率范围：300～2000VA。
5、对于市电进行简单的升降压及滤波处理后直接供给负载，总是输入电源不会符合要求时总算系由电池供电。
6、在大多数时间内负载使用的是市电。
7、结构简单、价格便宜、体积小、噪声低、效率高。
而C3KS是属于长效机型 可以根据客户的延长时间要求来配置蓄电池才可以使用比如可以延长1小时配置8块12v24ah蓄电池就可以了有具体要求可联系客服要报价 给您优惠的价格
Sante C10KS-C3KS Single inputSingle output UPS Power supply What is the ups backup powersupply
1, the backup UPS power supplyand means that the power supply is changed by the UPS immediatelyafter the power failure, and there is a short power change time atthe end.
2, Sina.com mechanical in shortmeans that the power supply still needs to use UPS, whether thepower supply has electricity or no electricity, so it belongs tothe product
4, backup UPS: backup UPS ismainly applicable to the mains fluctuation is not large, for thepower supply quality requirements are not high in myopinion.
5, backup UPS switching time isgenerally less than 10 seconds, not suitable for use when from thecritical and power supply can not be interrupted orplace.
6, but only the switching timeof 15 minutes, the general computer such as electrical equipment orswitching power supply should be able to maintain about 10 secondswhen the power is off, electrical equipment generally does not haveproblems after these switching times.
山特C10KS山特C3KS 单进单出UPS电源