MT122000G（12V200AH）凝胶型
阀控铅酸蓄电池
MT122000G的设计寿命为12年，适用于20摄氏度的浮动
应用和循环30%放电深度的约1500次循环
应用
由于我们的产品都是可充电的、效的、免维护的&
可在所有位置使用的防漏性，并且符合JISC、BS、，
DIN、IEC等。
我们的容器都是ABS树脂，等级为：UL94-HB、UL94V-0&
122000克
12V200Ah
规格
标称电压12V
容量200AH@20℃，额定10小时（切断电压1.80V/电池）
重量约61公斤或134磅
内部电阻约3.3 mΩ
自放电率在25摄氏度时每月约3%
排放：-15至50摄氏度（5至122华氏度）
充电：5至35摄氏度（41至95华氏度）工作温度范围
储存：0摄氏度至40摄氏度（32华氏度至104华氏度）
浮动充电电压13.50至13.80V（-15V/摄氏度）
循环充电电压14.10至4.40V（-20V/摄氏度）
大充电电流50安培（A）
升压/均衡充电不需要
端子类型铜
容器材料普通ABS树脂
MT122000G (12V200AH) GEL TYPE
Valve Regulated Lead Acid Battery
MT122000G having its design life of 12 years @ 20 degreeCelsiusfor floating
application and around 1500 cycles for 30% depth of dischargefor cyclic
application.
As our product were all rechargeable , highly efficient,maintenance free &
leakage proof usable in all positions and it meets the standardsof JISC, BS,
DIN, IEC etc.
We’re ISO9001certified &UL approved as well as CE
Our containers were all ABS resin and grades were : UL94-HB,UL94V-0 &
MT122000G
12 volts 200Ah
UL94V-2 (flame retardant types could be arranged).
Specification
Nominal voltage 12 volts
Capacity 200 ampere hours @20℃, 10 hours rated (cut off voltage1.80V/cell)
Weight approx. 61 kg or 134 pounds
Internal resistance Approx. 3.3 mΩ
Self-discharge rate Approx. 3% per month @ 25 degree Celsius
Discharged: -15 to 50 degree Celsius (5 to 122 degree F )
Charging: 5 to 35 degree Celsius (41 to 95 degree F) Operationtemperature range
Storage: 0 degree to 40 degree Celsius (32 to 104 degree F )
Floating charge voltage 13.50 to 13.80 volts (-15mv / degreeCelsius )
Cyclic charging voltage 14.10 to14.40 volts (-20mv / degreeCelsius)
Maximum charging currant 50 ampere (A)
Boost/equalizing charge Not required
Terminal type Copper
Container material General ABS resi