本公司是一家集代理、经销为一体的电力电子半导体销售和电力电子行业解决方案的产业链供应商，销售国内外知名品牌电力电子半导体器件。韩国LS连接器GB35L-34P-H08-E10000原装现货供应，公母座供应，欢迎来电咨询！
其他型号如下：
GB35L-34P-H08-E10000
GB35L-40P-H08-E10000
GB35L-40S-H08-E10000
GB35L-50P-H08-E10000
GB35L-50S-H08-E10000
GB35R-10P-H08-E10000
GB35R-60P-H08-E10000
GB04P-10P-H08-E5000
GB04P-10S-H08-E5000
GB04P-40P-H08-E5000
GB35R-40S-H08-E10000
GU073-5P-SE-E2000
GB35B-34S-H08-E10000
GB35R-34P-H08-E10000
GB042-60P-H10-E5000
GB042-40P-H10-E5000
GB35R-60S-H08-E10000
GB35R-34S-H08-E10000
GB35L-34S-H08-E10000
GB042-10P-H10-E5000
GB35R-24P-H08-E10000
GB35R-48S-H08-E10000
GB04P-30S-H08-E5000
GB04P-24P-H08-E5000
GB35R-10S-H08-E10000P
GB35R-20P-H08-E10000
GB35R-30P-H08-E10000
GB35R-40P-H08-E10000
GB35R-48P-H08-E10000
GB35R-54P-H08-E10000
GB35R-10S-H08-E10000
GB35R-20S-H08-E10000
GB35R-30S-H08-E10000
GB35R-54S-H08-E10000
GB35K-24P-H08-E5000
GB35K-30P-H08-E5000
GB35K-36P-H08-E5000
GB35K-70P-H08-E5000
GB35K-24S-H08-E5000
GB35K-30S-H08-E5000
GB35K-36S-H08-E5000
GB35K-70S-H08-E5000
GB357-10P-H06-E10000
GB357-16P-H06-E10000
GB357-30P-H06-E10000
GB357-10S-H06-E10000
GB357-16S-H06-E10000
GB357-30S-H06-E10000
GB3-16P-H06-E15000
GB3-34P-H06-E15000
GB3-40P-H06-E15000
GB3-16S-H06-E15000
GB3-34S-H06-E15000
GB3-40S-H06-E15000
产品介绍：
1. 시험 (Test) 시험은 다음과같이 2가지로나눈다.Testis classified two kinds of methods as following.
2，인정시험(Approval Test) 인정시험은 원칙적으로 제품이제작되었을 때 표-1(시험 순서 및시료수)에따라 본 제품규격의 요구 사항을만족하는 가를 확인하는 시험이지만,필요에따라 양산 중에 할 수도 있다.Inprinciple approval test shall be done to confirm whether theproducts are satisfied with the specification or notbefore production in accordance with table-1 (Test sequence andsample quantity), but if necessary, it can be carriedout during mass production.
3， 출하검사(Inspection By Attributes) 출하검사는 제품 출하 시실시하는 검사로써,MIL-STD-105 에 준하고 특별한 이의 사항이없는 한AQL1.0%를보증한다.Inspectionby attributes is the test based on MIL-STD-105, which shall becarried out when the products are delivered.On condition that any special significance is not designated,the acceptablequality level 1.0% shallbe guaranteed.
4， 시험조건(Test Condition) 특별한 시험조건을 지정하지않는 한 일반적으로 시험은 다음의 조건에서 실시한다.Testconditions shall be maintained as following if not speciallydesignated. 온도(Temperature): 10 ~ 35 ℃습도(Humidity): 40 ~ 90 % RH 기압(AtmosphericPressure) : 650 ~ 800 mmHg
我们一贯秉持"以信为本，以诚待人，专业专注，科技创新"的经营理念，凭借着快速的反应、过硬的品质、合理的价格及准时的交货，赢得了客户的信任，已成为国内多家企业的合作供应商。
