山特UPS电源C3K内置电池 3KVA视频2025

　山特UPS电源C3K内置电池 3KVA视频2025

山特UPS电源C3K3KVA详细参数采用RS-232C的com端口2：USB口来下载，plc上有两个接口，一个是圆形的九针口，一个是miniUSB口，如下图所示：黄线插圆形口，蓝线插小方形口。程序编好后，如果采用RS232com口使用黄颜色线，在PLC软件中，在导航中双击连接目标：在左上角的计算机侧I/F一排的SerialUSB，双击它：选择个RS232C，选择好com口,如果不清楚是哪个com口，打开电脑设备管理器找到端口(COM和LPT)就出出现连接的com口选择完后确认点击通信测试：连接成功，点击确定。　

一般EH系列UPS只能在室内运用，是不可以长时间放在户外运用的;

　　确认UPS电源及外接电池箱的运送路径及置放地址的承受力与空间大小足够包容UPS、外接电池箱及转移器具，以便通行与装置;

　　确认装置地址有足够空间来通风散热这也是便利定期维护;

Regular maintenance of detailedparameters of Sante UPS power supply C3K3KVA: Remove dust insidethe machine, measure the voltage of the battery pack, replaceunqualified batteries, check the operation of the fan, check thesystem parameters of the UPS.

When using Sante ups powersupply, be sure to follow the manufacturer's product manual toensure that the connected fire line, neutral line, ground line meetthe requirements, do not allow users to change their orders to eachother. For example, the communication input wiring of a brand ofUPS power supply in the United States and the connection method ofthe communication input socket there are also three-phase UPS needsto pay attention to the phase sequence problem, otherwise it willpresent a phase sequence error alarm.

Each user will purchase SandtUPS power after the device is used in different places, it isrecommended to look at the device and wiring details before thedevice. In fact, in addition to the technical requirements, SanteUPS power supply also has certain requirements for the environmentwhere it is placed, and Sante UPS authorized operators share withus what kind of needs Sante ups power supply has for theenvironment of the device.

　　机房内空调尽量控制在25℃左右、相对湿度小于90%以内、运转高度为海拔3000米，如需求定制的可联络深圳山特UPS授权运营商;

山特UPS电源C3K3KVA详细参数导线载流量为截面数的3.5倍，即35×3.5=122.5。从50mm”及以上的导线，其载流量与截面数之间的倍数关系变为两个两个线号成一组，倍数依次减0.5。即70mm”导线的载流量为截面数的3倍；9120mm”导线载流量是其截面积数的2.5倍，依次类推。“条件有变加折算，高温九折铜升级”。上述口诀是铝芯绝缘线、明敷在环境温度25℃的条件下而定的。

山特UPS电源C3K内置电池 3KVA视频2025