LEADER蓄电池CT150-12瑞典12V150AH防爆排气系统
Handling, storage, charging,and maintenance:
1. The battery is heavy and theshell is brittle. When handling, it should be handled with care andthe voltage should be placed upright. It is strictly prohibited tolay on the side, and rolling and throwing are also strictlyprohibited. At the same time, be careful not to put pressure on theterminals.
2. Batteries should be storedor installed in a dry and ventilated place, avoiding directsunlight, and should be kept away from heat sources and areas proneto sparks.
3. The battery should be fullycharged before storage, and storage after discharge is not allowed.Batteries should be stored in an environment of 0-30 ℃, and it isadvisable to replenish the stored batteries every two months.Routine inspections should be conducted on the battery pack everymonth, with the following inspection items:
(1) The outer shell and uppercover of the battery should be kept clean, and the battery sealingcover bolt and exhaust hole should be kept unobstructed.
(2) The shell and poletemperature of the battery.
(3) Check if the battery coveris deformed and if there is liquid leakage around it, and whetherthere is liquid leakage or acid overflow from the pole.
(4) Is the connecting linetightened.
(5) Single battery floatcharging voltage, battery pack charging current, total floatcharging voltage, and load current.
中国的胶体电池,现在还都是采用AGM隔板的.早期,我写东西也不得不把中国的胶体电池打上引号,以示与德国胶体电池以区别.后来写多了,也忽略了.中国除了叫做胶体电池以外,还有很多五花八门的称呼方法.如:“铅晶电池”、“固体电池”、“硅能电池”、“矽能电池
胶体蓄电池的内部主要是SiO2多孔网状结构,存在大量微小缝隙,能使电池正极产生的氧顺利的迁移到负极极板上,便于负极吸收化合;2:胶体蓄电池所带酸量较大,所以其容量与AGM蓄电池基本一致;3:胶体蓄电池的内阻较大,一般不具备较好的大电流放电特性;4:热量易扩散,不易升温,热失控几率很小;