PROTEAN II xi2-D 双向电泳槽
【介绍】
The PROTEAN II xi 2-D 电泳槽包含聚丙烯酰胺管式双向电泳需要的所有组件。
※ 在PROTEAN II xi 2-D 电泳槽内,可同时进行向的管式凝胶电泳和第二向的板式凝胶电泳
※ 运用管式凝胶适配器,一次电泳可聚焦多达16 根向IEF 管式凝胶
※ 斜面玻板,易于放置管式凝胶的板式凝胶表面
PROTEAN II xi 2-D 电泳槽组件:
管式凝胶中央制冷芯
带密封垫条的电泳中央制冷芯
缓冲液槽和带有电线的盖子
板式凝胶灌胶架、玻璃板和三明治夹
垫圈和塞子
玻璃管
【订货信息】
PROTEAN II xi 2-D Cell | |
165-1931 | PROTEAN II xi 2-D Cell, includes a centralcooling core with gaskets, lower buffer chamber, lid withcables, 2 sets of glass plates (with beveledinner plates), four 16cm sandwich clamps, twenty-four 180 mm long glass tubes (tube diameter = spacer thickness), 2 tube gel adaptors, 16grommets, 16 stoppers, two 1.0 mm 2-D combs, four 1.0mm spacers, upper buffer dam, casting stand with gaskets,leveling bubble, instructions |
165-1932 | PROTEAN II xi 2-D Cell, includes a centralcooling core with gaskets, lower buffer chamber, lid withcables, 2 sets of glass plates (with beveledinner plates), four 16cm sandwich clamps, twenty-four 180 mm long glass tubes (tube diameter = spacer thickness), 2 tube gel adaptors, 16grommets, 16 stoppers, two 1.5 mm 2-D combs, four 1.5mm spacers, upper buffer dam, casting stand with gaskets,leveling bubble, instructions |
165-1933 | PROTEAN II xi 2-D Cell, includes a centralcooling core with gaskets, lower buffer chamber, lid withcables, 2 sets of glass plates (with beveledinner plates), four 20cm sandwich clamps, twenty-four 180 mm long glass tubes (tube diameter = spacer thickness), 2 tube gel adaptors, 16grommets, 16 stoppers, two 1.0 mm 2-D combs, four 1.0mm spacers, upper buffer dam, casting stand with gaskets,leveling bubble, instructions |
165-1934 | PROTEAN II xi 2-D Cell, includes a centralcooling core with gaskets, lower buffer chamber, lid withcables, 2 sets of glass plates (with beveledinner plates), four 20cm sandwich clamps, twenty-four 180 mm long glass tubes (tube diameter = spacer thickness), 2 tube gel adaptors, 16grommets, 16 stoppers, two 1.5 mm 2-D combs, four 1.5mm spacers, upper buffer dam, casting stand with gaskets,leveling bubble, instructions |
Note: Each PROTEAN II xi 2-D cellincludes a central cooling core with gaskets, lower buffer chamber,lid with cables, 2 sets of glass plates (with beveled innerplates), 4 sandwich clamps, 24 glass tubes (180 mm long, tube diameter = spacer thickness), 2 tube gel adaptors, 16grommets, 16 stoppers, two 2-D combs (2), 4 spacers, upperbuffer dam, casting stand with gaskets, leveling bubble,instructions. Each cell includes sandwich clamps for runninggels of the corresponding size (either 16 cm or 20 cm); 1.0mm and 1.5 mm indicate the thickness of spacers and combsincluded with the cell. | |
Tube Gel Casting Accessories | |
165-2020 | Model 225 Tube Gel Casting Stand |
165-3122 | 5.0 mm ID Glass Tubes,7.0 mm OD, 125 mm length, 24 |
165-3136 | 1.0 mm ID Glass Tubes,6.0 mm OD, 180 mm length, 24 |
165-3137 | 1.5 mm ID Glass Tubes,7.5 mm OD, 150 mm length, 24 |
165-3138 | 1.5 mm ID Glass Tubes,7.5 mm OD, 180 mm length, 24 |
165-3150 | 3.4 mm ID Glass Tubes,5.0 mm OD, 125 mm length, 24 |
165-3155 | 2.4 mm ID Glass Tubes,4.0 mm OD, 160 mm length, 24 |
Slab Gel Handcasting Accessories | |
165-1821 | Inner Plates, for 16 cm cell, 16 x 20cm, 2, for PROTEAN II xi cell only |
165-1822 | Outer Plates, for 16 cm cell, 18.3 x 20cm, 2, for PROTEAN II xi cell only |
165-1823 | Inner Plates, for 20 cm cell, 20 x 20cm, 2 |
165-1824 | Outer Plates, for 20 cm cell, 22.3 x 20cm, 2 |
165-1827 | Beveled Inner Plates, for 2-D tube gelprocedures, 16 cm bevel length, 16 x 20 cm, 2, for PROTEAN II xi cell only |
165-1828 | Beveled Inner Plates, for 2-D tube gelprocedures, 16 cm bevel length, 20 x 20 cm, 2, for PROTEAN II xi cell only |
165-1843 | PROTEAN II xi Spacers, 16 cm, 1.0 mmspacers |
165-1848 | PROTEAN II xi Spacers, 20 cm, 1.0 mmspacers |
165-1897 | PROTEAN II xi Comb, 2-D (1 reference well), 1.0 mm |
165-1901 | PROTEAN II Sandwich Clamps, 16 cm set (1 left,1 right) |
165-1902 | PROTEAN II Sandwich Clamps, 20 cm set (1 left,1 right) |
165-1911 | Slab Gel Casting Stand, with gaskets |
Other Accessories | |
165-1806 | Central Cooling Core, with gaskets |
165-1807 | Buffer Tank |
165-1909 | Upper Buffer Dam |
165-1943 | Tube Gel Loading Needles, 18 cm, 22 gauge,blunt tip, luer hub (for casting monomer in small-diametertubes), 2 |
165-1944 | Tube Gel Extrusion Needles, 9 cm, 26 gauge, beveled tip, luer hub (for removing gels from tubes), 2 |
System Accessories | |
165-2025 | PROTEAN II xi Multi-Gel Casting Chamber,includes casting chamber, sealing plate, silicone gasket, 15separation sheets, 4 acrylic blocks, 10 xi alignment cards, tapered luer connector, leveling bubble, instructions |
165-4121 | Model 495 Gradient Former, 100–1,500 ml,includes body with valve stem and tubing connection kit |
更多详细资料请登录www.cbio21.com查询